SCC1200 HHO Bus Carbon Cleaning Machine
1.Introduction：
Hydrogen fuel saver has the advantages of safety and efficiency, zero pollution, easy installation, no need to change the structure of the vehicle and engine body, etc., and is suitable for internal combustion vehicles with high cutting energy consumption and large exhaust emissions, including trucks and engineering vehicles. By improving the combustion environment of the fuel in the engine combustion chamber, the hydrogen molecular vehicle fuel saver realizes compound combustion, thereby improving power, saving fuel and reducing soot PM2.5 emissions.
2.Working Principle:
Brown's carbon removal equipment innovatively harnesses the principle of water electrolysis, eschewing traditional chemical agents for carbon removal. The generated hydrogen - rich gas enters the engine via the intake manifold and rapidly disperses to all parts of the engine. Leveraging the catalytic and permeation properties of hydrogen, along with the combustion characteristics of oxygen, flame - retarded carbon deposits gradually decompose under the action of hydrogen molecules and undergo combustion. With just 20 - 40 minutes of idle - speed operation, the equipment can thoroughly and efficiently clean the engine's carbon deposits, which are then discharged through the exhaust pipe. This process not only ensures effective carbon removal but also represents a more environmentally - friendly and efficient alternative to conventional methods.
3.Advantage：
After 30 minutes of installation, the fuel-saving effect is obtained, and the black smoke visible to the naked eye is reduced or even disappeared. The power is significantly improved, the fuel consumption is reduced, the service life of the DPF and the engine is effectively extended, and the frequency of maintenance is reduced.
4.Usage Effects：
Reduce noise by at least 12%
Significantly reduce the maintenance costs of the vehicle's combustion system and exhaust system
Markedly extend the service life of the engine and DPF
No need to remove any engine parts (only need to connect to the intake manifold)
Does not damage the engine oil
5.Application：
- Urban transport: For buses, taxis, and private cars, it cuts fuel use and emissions, aiding urban air quality.
- Long - distance freight: Installed on trucks, it optimizes engine combustion, slashing fuel costs for logistics firms.
- Construction sites: Used on engineering vehicles like excavators, it boosts power and reduces fuel consumption, enhancing efficiency and lowering costs.
- Industrial parks: Helps industrial vehicles save fuel and meet sustainable development goals.
- Military: Improves fuel efficiency and performance of military vehicles, reducing fuel dependency.
- Rural areas: Applied to agricultural vehicles, it saves farmers' fuel costs and lessens environmental impact.
6.Parameter：
|
Name: |
HHO carbon cleaning machine |
|
Model NO.: |
SCC1200 |
|
Input Voltage： |
220V/110V |
|
Working Gas Pressure (Mpa)： |
0.05-0.2 |
|
Relative Humidity (%)： |
90＞ |
|
Rated Gas Production (L/h)： |
1200 ±10% |
|
Water Consumption： |
0.55 |
| Power Consumption ： | 3.5 |
|
Water Feed： |
Manual |
|
Cooling Mode： |
Air Cooling |
|
The Insulation Level: |
F |
|
Power Supply Protection Grade: |
IP21S |
|
Working Medium: |
Carbon cleaning liquid |
|
Working Method: |
Continuous |
|
Enviroment Temperature (℃): |
0~40 |
|
Machine size: |
590*490*720mm
|
|
Net Weight: |
56KGS |
|
Package Size： |
610*530*850mm
|
|
Package Gross Weight： |
85KGS |
7.Our Company：
Shichun Hydrogen Energy is a high-tech enterprise. With hydrogen energy technology featuring zero pollution, low energy consumption and high reducibility as its core, it specializes in the research, development, manufacturing and sales of hydrogen energy equipment, environmental protection equipment, laser equipment, complete sets of welding and cutting equipment, motor vehicle maintenance equipment, inverters, and hydrogen-oxygen ventilators. The equipment is mainly applied in various fields such as boiler combustion support, boiler energy conservation and environmental protection, automobile power enhancement, waste incineration, steel cutting and welding, pharmaceutical sealing, and hydrogen-powered vehicles.
1, Increase the number of gasoline, can reduce carbon deposition?
Carbon deposits are mainly impurities in gasoline, and dust particles in the air, formed in the combustion chamber precipitated. Gasoline with a high number of markings has relatively less impurities, and using high-grade gasoline, if conditional, is really good for the engine.
In the same way, do not often run dusty roads. Regularly clean up the air cells (air filter) and also reduce carbon deposition. Every 20,000 kilometers, it is best to replace the air grid and clean the fuel injectors and throttles. If you save this money, in the event that the engine is overhauled due to serious carbon deposits, you may have lost a large amount of money.
2, Idle for a long time, parking air conditioning will cause carbon deposition it?
Do not allow the vehicle to stay in an idle state for a long period of time, especially if you do not open the air conditioner for a long time. "The water temperature is 85~90°C, and the engine will be in the best working condition. Otherwise, the combustion of gasoline will not be enough and the carbon deposition will be more. From this point of view, in the morning long hot car, the temperature of the engine will rise slowly and it will also cause carbon deposition. The air conditioner runs at idle speed, and it will load the engine." However, Shichun also believes that it is not necessary to do too much. If it takes only a few minutes, it is not necessary to turn off the engine. Because of the instant of restart, not only high fuel consumption, but also wear and tear on the engine.
3, Run high speed can wash away carbon?
Running at a high speed can indeed use the air flow to flush the airway and flush out a portion of the carbon deposit. Therefore, if you just go out and take the two options of high speed and national highway, you may choose to pull back a high speed. However, Shichun believes that this is not necessary if it is specifically designed to "run away carbon deposits" to run high speeds. "It is a waste of time, but it also costs money, but also spend a lot of high-speed tolls, the effect is better to do a maintenance to 4s shop!"
8.Q&A:
Q: Is your machine safe to use?
A: Our machine has 12 safety devices.
Q: Is the voltage customizable? 110V/220V/380V?
A: Yes, it is. 220V are in stock, 110V/380V may wait for days.
Q: What kind of water is added to the machine?
A: Soft water or distilled water. Avoid other impurities in the water from clogging the engine's components.
Q: Is the machine easy to operate?
A: Yes, it's very easy, just 3 steps, connect machine, start it and wait! Meanwhile we have videos/instructions for you.
Q: Where to buy electrolyte?
A: It's easy to buy in your local store. In principle, the electrolyte is not consumed, you just only buy once.
Q: When there is no water, will the machine burn up?
A: There are sensors in our machine, if water is out, the machine will stop working.
Q: Can the system customize the language and LOGO?
A: Yes, English/Spanish/Deutsch etc are available. LOGO is welcomed to customized.
Hot Tags: SCC1200 HHO Bus Carbon Cleaning Machine, China, suppliers, manufacturers, factory, buy, customized, price, cheap, HHO Truck Carbon Cleaning Machine, Oxy-hydrogen Carbon Cleaning Machine For Car, HHO Bus Carbon Cleaning Machine, Oxy-hydrogen Clean Carbon Remover, Oxy-hydrogen Engine Carbon Cleaning Equipment, Oxy-hydrogen Cleaning System Engine Decarbonizing Machine
