Carbon Steel Cutting Machine

HHO carbon steel cutting machine flame cutting have many advantages, including:

1) Hydrogen and oxygen energy is a clean energy source. No waste gas is produced during the manufacturing and use. Conducive to environmental protection and human health.

2) The oxyhydrogen flame is concentrated and there is no heat radiation, and workers are protected from thermal fatigue. When the steel plate is cut, the surface is smooth and free of slag.

3) Hydrogen and oxygen flame temperature is as high as 2800 degrees and the fire power is concentrated. Therefore, when cutting, the preheating time is equivalent to acetylene, which is faster than other gas preheating time.

4) Hydrogen energy is ready for use, on-demand production, low-pressure gas supply, no storage, and at the same time, the oxyhydrogen machine has multiple safety protection devices. Therefore, it is safer to use than gas cylinders.

5) The production of hydrogen energy requires only water and electricity, and it can work 24 hours in a row. As long as there is electricity in the water, there will always be a gas supply. When the gas cylinder is used up, it needs to be replaced frequently. Therefore, the time for replacing the gas cylinder can be saved and the working efficiency can be improved.

6) Hydrogen and oxygen cuts do not need to mix combustion-supporting oxygen. Therefore, it is not necessary to adjust the proportion of oxygen gas and it is more convenient to use.

7) Hydrogen Oxygen Cutting Compared with other fuel gases, it can save mixed oxygen and save 20% oxygen. Compared with acetylene, it can save more than 50% of gas cost. Compared with propane, it saves more than 30% of the cost.

Oxygen hydrogen carbon aluminium profile cutting machine have many advantages, including:

1. The power supply system and the electrolysis system are safely isolated, and the conductive parts may be completely isolated from the enclosure by high-quality insulating parts. In addition, the grounding ensures that everything is safe.

2. All the successive fittings are all made of stainless steel fittings, and the F4 seals are sealed without leakage of air leakage. Multiple multi-point pressure relief safety devices ensure overpressure safety.

3. Secondary water seal anti-tempering device protection, anti-flashback automatic water drainage, water shortage protection, good security and high reliability.

4.The product has been certified by the European Union CE safety certification and the Hunan Provincial Technical Supervision Inspection and Testing.