Operation process of carbon cleaning machine
Using the ARM control system, the operation is convenient and simple, no tedious professional training is required, and it can be mastered in just a few minutes.
The carbon removal operation process of the carbon cleaning machine is as follows:
A. Add pure water to the hydrogen-oxygen carbon remover, and connect the output air pipe of the hydrogen-oxygen carbon remover to the car intake manifold with a randomly configured hose.
B. Start the car, run at idle speed, and then start the hydrogen-oxygen decarburizer (turn on the power switch of the device - press F4 to set the decarburization time - press F1 to confirm the start of decarburization), after the decarburization time is over, an alarm will automatically prompt, stop decarburization carbon.
C. Accelerate the car to 4000 rpm at idle speed, repeat five times, you can see that the carbon deposits in the exhaust pipe are discharged in the form of gas and liquid.
Because it adopts the latest ARM automatic control system, it is more intelligent and user-friendly than the traditional carbon cleaning machine which adopts the analog signal control method controlled by buttons and switches.