Jun 07, 2022

The benefits of using a hydrogen-oxygen decarbonizer have to be seen

Leave a message

The benefits of using a hydrogen-oxygen decarbonizer have to be seen

1. No need to remove any parts of the engine (only connect - intake manifold). Never damage oil seals, gaskets, and engines, or damage your oil (maintenance-free, no oil changes).

2. Immediately increase power by 10%-20%. It is obvious that the first and second gears have a strong start, the acceleration is accelerated, the power is enhanced when climbing, the accelerator is obviously lighter, and the vehicle speed is reduced when driving at high speed.

3. Immediately save fuel by 5%--20%. Extend the service life of the oxygen sensor By cleaning the oxygen sensor, the air-fuel ratio of the vehicle is restored to about 14.7:1, which is close to the value of a new car, which can save fuel and enhance power.

4. Immediately extend the service life of the three-way catalytic converter. The high-temperature water vapor generated by the hydrogen-oxygen machine removes the sulfur-phosphorus mixture of the three-way catalytic converter and restores the activity of the three-way catalytic converter.

5. Effectively prolong the engine overhaul time.

6. Reduce the emission of harmful exhaust gas by 72%. (Let you pass the exhaust emission standard once the vehicle is inspected) 7. It only takes 20-40 minutes.

A comparison of the two methods:

Hydrogen and oxygen decarbonization: the engine can be idling, and water is generated after combustion, which is non-polluting, non-toxic, non-chemical, and has no damage to the health of operators and the environment. No damage to oil seals, gaskets and engine. The operation is simple and quick, no need to be guarded after the connection is completed, and the material cost consumes 2-3 degrees of electricity and a paper cup of water. No oil changes are the safest and cheapest way to remove carbon in the industry today.

Traditional methods: one is dripping, and the other is foam decarbonization. Both are chemicals that can damage oil seals, gaskets, and engines. The exhaust gas discharged during carbon removal has a pungent smell, which is very harmful to the human body. The oil must be replaced after carbon removal, and the spark plugs, fuel injectors, and three-way catalytic converters need to be cleaned separately.


Send Inquiry